Minimum Hooks and Cogs

Background

If a cog, hook or ligature leg is too short, the bar can't be bent. The tables below show the shortest leg allowed for each bar size.

All measurements are in millimetres (mm).

 

Steps to follow

Choose a table

Use the Fitment Table for ligatures and fitments from N10 to N24.

Use the Standard Table for everything else. This includes ligatures and fitments N28 and larger.

Long shapes are an exception:

T-Shape

T-Shape

For any T-shape (closed ligature), where the length of any single element exceeds 1501 mm, the standard reinforcement bending requirement of a minimum 5 × bar diameter (5d) pin diameter shall apply.

LL-Shape

LL-Shape

For any LL-shape, where A & C element exceeds 1501 mm, the standard reinforcement bending requirement of a minimum 5 × bar diameter (5d) pin diameter shall apply to dimension B.

U-Shape

U-Shape

For any U-shape, where A & C element exceeds 1501mm, the standard reinforcement bending requirement of a minimum 5 × bar diameter (5d) pin diameter shall apply to dimension B.

 

Check each leg

  1. Find the bar size in the table.
  2. Check that every cog, hook and ligature leg is at least the number shown.
  3. If a leg is shorter, make it longer before the shape is released.

     

Standard Table

Bar DiameterMinimum Pin SizeMinimum CogMinimum Double CogMinimum Double Reverse CogMinimum Hook LengthMinimum Hook HeightMinimum Ligature
5 x Diameter for Standard ReinforcementCogDouble CogDouble Reverse CogHookHookLigature
N105012012012012075120
N126014514514514590145
N1680195195195195120195
N20100240240240240150240
N24120290290290290180290
N28140340340340340210340
N32160385385385385240385
N36180435435435435270435
N40200480480480480300480

 

Fitment Table

Bar DiameterMinimum Pin SizeMinimum CogMinimum Double CogMinimum Double Reverse CogMinimum Hook LengthMinimum Hook HeightMinimum Ligature
4 x Diameter for Fitment Reinforcement onlyCogDouble CogDouble Reverse CogHookHookLigature
N104011011012011065110
N124813513514513580135
N1664180180195180105180
N2080220220240220130220
N24100265265290265160265
N28N/AN/AN/AN/AN/AN/AN/A
N32N/AN/AN/AN/AN/AN/AN/A
N36N/AN/AN/AN/AN/AN/AN/A
N40N/AN/AN/AN/AN/AN/AN/A

The Minimum Double Reverse Cog is the same in both tables. There is no shorter fitment version.

 

What the Columns Mean

  • Bar Diameter: the bar size.
  • Minimum Pin Size: the size of the pin the bar is bent around.
  • Minimum Cog: a 90° bend at one end of the bar.
  • Minimum Double Cog: a cog at both ends, pointing the same way.
  • Minimum Double Reverse Cog: a cog at both ends, pointing opposite ways.
  • Minimum Hook Length: the leg on a hook.
  • Minimum Hook Height: the overall height of a hook.
  • Minimum Ligature: the leg on a closed ligature.

Was this article helpful?

0 out of 0 found this helpful
Have more questions? Submit a request

Comments (0 comments)

Please sign in to leave a comment.