Installing your BOLT2-4G GPS Tracker on your Vehicle

Background

This knowledge-based article provides steps on how to easily connect an OBD2 4G GPS tracker to your vehicle. 

Before you begin

• For your safety ensure your vehicle is turned off before you start.
• If your vehicle has any electronic systems that might be affected by the installation, consider backing up any data or settings as a precaution.
• Confirm with the Bitberry team if the device is configured.

Steps to follow

1. Locate the OBDII port in your vehicle.
   PLEASE NOTE: The OBDII port is usually under the steering wheel or inside the glovebox. The location may vary from one vehicle manufacturer and or model to another
   
   
   
2. Insert the OBD2 4G GPS tracker into the OBD2 port firmly. Make sure it's securely plugged in.
   
   
   
3. Turn on the ignition to power up the vehicle.
   PLEASE NOTE: This step is necessary for the tracker to start working and communicating.
   
   
   
4. Check the device's lights for power and connectivity.
   
   
   PLEASE NOTE: After installation, verify that the tracker is properly connected and transmitting data. You can do this by getting in touch with a Bitberry Team member.