Before you begin
Below are the steps to take to modify a Stock – HDW Coil count. These steps begin with the following assumptions:
- You are viewing the count you wish to modify (See Find and View a Count)
- The count type of the count is Stock – HDW Coil (See Change a Count’s Count Type)
Steps to take
Take the following steps to modify a Stock – HDW Coil Count:
- If required, take the following steps to change the count method:
- Tap on the edit button (pencil symbol inside a circle, located towards the top of the screen)
- Tap on the Count Method field and select the method by which you wish to count HDW coil
- The count is altered to reflect the new count method. For example, if counting by percentage, you cannot also enter a weight and so the weight field is disabled.
- Tap on the edit button (pencil symbol inside a circle, located towards the top of the screen)
- If required, tap in the Type of Coil field and select the type of HDW coil being counted.
- If not already correct, tap in the Weight of Full Coil field then enter the weight of a full coil of HDW.
- If required (and permitted), in the Fraction of Full Coil Remaining field then enter the percentage of HDW coil remaining. For example, if three quarters (75%) of the coil remains, enter 75.
Tip: If the HDW coil is full, tap on the Full button to enter 100 (100%) into the Fraction of Full Coil Remaining field.
- If required (and permitted), tap in the Weight of Coil Remaining field then enter the weight of the HDW coil remaining.
- If required, tap in the Number of Identical Coils field then enter the number of identical coils of HDW.
After following the steps above, you may wish to:
- Create another count in the same section (See Create a Count from a Count)
- Delete the count (See Delete a Count)
Comments (0 comments)